CPS1 – Kick Harness
>>> DOWNLOAD PDF VERSION HERE <<<
>>> BUY THE SPARE PART HERE <<< or click on the spare part name in the “Materials needed” section
Materials needed
|
Connector |
H10P-SHF-AA – 10 Pin Female connector aka JST-NH 10 Female connector
|
|
Pins |
|
|
Wire |
22 AWG as per JST recommendation
|
Pinouts
Pinout for 6 buttons games
|
Wire colors |
Pin number |
Connections |
|
Black |
1 |
GND |
|
Black |
2 |
GND |
|
Purple |
3 |
Player 1 button 4 |
|
Gray |
4 |
Player 1 button 5 |
|
White |
5 |
Player 1 button 6 |
|
|
6 |
NC |
|
Orange |
7 |
Player 2 button 4 |
|
Green |
8 |
Player 2 button 5 |
|
Blue |
9 |
Player 2 button 6 |
|
|
10 |
NC |
Pinout for 3/4 player games as C&D / Captain Commando
|
Wire colors |
Pin number |
Connections |
|
Black |
1 |
GND |
|
Black |
2 |
GND |
|
|
3 |
Right |
|
|
4 |
Left |
|
|
5 |
Down |
|
|
6 |
Up |
|
|
7 |
Button 1 |
|
|
8 |
Button 2 |
|
|
9 |
Coin |
|
|
10 |
Start |
Pictures
How does the connector looks like ?
How to have it fully working ?
How to complete the kick harness ?
a) Connect directly to your buttons and joystick
6 buttons setup
Material needed
|
Terminals |
12 * 2.8mm Crimp Terminals Female Spade Connector
|
|
Ground |
Use Standard Female Terminals or Crimp Closed End Connectors
|
|
Enclosure Optionnal |
Quick Disconnect Sleeve or Quick Disconnect Enclosure
|
How to connect to your buttons ?
Using Ground Wires in the same connector (figure a)
Using Crimp Closed End Connectors (figure b)
Player 3 or player 4 setup
Material needed
Spare parts if using microswitches with 4.8 terminals
|
Terminals |
8 * 4.8mm Crimp Terminals Female Spade Connector
and 8 * 2.8mm Crimp Terminals Female Spade Connector
|
|
Ground |
Use Standard Female Terminals or Crimp Closed End Connectors
|
|
Enclosure Optionnal |
2.8mm Quick Disconnect Sleeve / 2.8mm Quick Disconnect Enclosure for 2.8mm Crimp Terminals Female Spade Connector
and 4.8mm Quick Disconnect Sleeve for 4.8mm Crimp Terminals Female Spade Connector
|
Using Ground Wires in the same connector (figure c)
Using Crimp Closed End Connectors
The only difference with « figure c » is the ground wire using Crimp Closed End Connectors instead of linking them via the female terminals. Please refer to « figure b » for the principle.
